Top 9 F7 Flight Controller – Hobby RC Quadcopters & Multirotors

As an Amazon Associate I earn from qualifying purchases.

1. SPEEDY BEE

#ad

Blackbox,Configuration and Firmware Flash via APP, 45A BLHeli 32 4-in-1 ESC for FPV RC Racing Drone DJI, SpeedyBee F7 Flight Controller Stack 30x30,BF/EMU/INAV Supported,Wi-Fi&Bluetooth

#ad
SPEEDY BEE #ad - No more need a laptop: configure your fpv drone, or fine-tune your PIDs, access your blackbox data, and configure any other parameters in just a few minutes. Even can configure motor direction wirelessly. Support blheli 32 ESCs.

Easily connect to dji air unit: v2 f7 fpv fc included a connector specifically for DJI air unit, so installation should be a breeze. World's first fc stack with wireless firmware flasher and blackbox analyzer: To simplify FPV, SPEEDY BEE creates the world's first FC stack that can flash the firmware and analyze the blackbox wirelessly anywhere just need a phone. First flagship 4-in-1 esc: built with the finest components, speedybee's latest flagship ESC features a pure and high performance.

Support 45a continuous output and 55A burst output10s, ready for your strongest 6S motors. Just need to connect speedyBee App, it supports Betaflight/EMU/INAV full configuration. Bf/emu/inav full support: whether you're at home or the field, your speedyBee F7 V2 is ready for you all the time. Usb type-c and 22mm cutouts for FPV camera on FC and ESC boards compact more fpv frames.
BrandSPEEDY BEE #ad
ManufacturerSPEEDY BEE #ad
Height0.31 Inches
Length1.65 Inches
Weight0.05 Pounds
Width1.5 Inches
Part NumberSPEEDY BEE V2

2. SPEEDY BEE

#ad

SPEEDY BEE F7 AIO Flight Controller Betaflight Bluetooth 8Pin Connector w/OSD Current Sensor Barometer 5V for RC Drone

#ad
SPEEDY BEE #ad - F7 aio flight controller: support osd and 4in1 ESC 8 PIN connector or Solder Pads Two connection methods. Built-in bluetooth chip: zero configuration, connect to the Speedy Bee App directly after powering on, easy to set the FC parameters. Better support for high currents: 5*5. 0v/1 * 9. 0v outputMax. 2. 5a and 3s - 6s Lipo Input. Battery monitoring: with current Sensor 200A and Integrated Barometer and RSSI input, safer flight. Black box: 32mb on board data flash and 6-layer PCB make it more solid and has External GPSI2C.
BrandSPEEDY BEE #ad
ManufacturerRunCam #ad
Part NumberSB-F7

3. iFlight

#ad

IFlight SucceX-D F7 TwinG Dual ICM20689 Flight Controller F7 FC Built-in OSD BEC Current Sensor Black Box for DJI FPV Air Unit HD Version…

#ad
iFlight #ad - Fc board add the popular and reliable USB Type-C instead of Micro USB which makes connection easily. Built-in osd, optimized circuit design, high-performance hardware, 9V/2.

5a bec, double 5V/2. 5a, further guarantees powerful performance of flight controller. F7 fc included a connector specifically for DJI air unit, so installation should be a breeze. This flight controller is ready for anything with 5 uarts, Dual ICM20689 gyro, 8 motor outputs, 32mb blackbox and a powerful F7 processor to run it all. The f7 flight controller hd version is designed to work seamlessly for DJI’s new HD FPV system.
BrandiFlight #ad
ManufactureriFlight #ad
Weight0.06 Pounds
Part NumberSucceX-D

4. SPEEDY BEE

#ad

SpeedyBee V2 F7 Flight Controller,30x30 Drone FC Flash Firmware Blackbox Motor Setting Wirelessly,BF/EMU Supported,Built-in Wi-Fi&Bluetooth for DJI FPV RC Racing Drone

#ad
SPEEDY BEE #ad - Easily connect to dji air unit: v2 f7 fpv fc included a connector specifically for DJI air unit, so installation should be a breeze. Bf/emu full support: whether you're at home or the field, your speedyBee F7 V2 is ready for you all the time.

It's that simple. Just need to connect speedyBee App, it supports Betaflight/EMU/INAV full configure. World's first fc with wireless firmware flasher and blackbox analyzer: To simplify FPV, SPEEDY BEE creates the world's first FC that can flash the firmware and analyze the blackbox wirelessly anywhere just need a phone. Just plug in your lipo to switch on the wireless connection, and arm your quad to switch it off. Usb type-c and 22mm cutouts for FPV camera on FC and ESC boards compact more fpv frames.

Even can configure motor direction wirelessly. Support blheli 32 ESCs. Built-in wi-fi & bluetooth: use bluetooth for quick access to your firmware configurator, or switch to Wi-Fi to flash firmware or download Blackbox data. No more need a laptop: configure your fpv drone, or fine-tune your PIDs, access your blackbox data, and configure any other parameters in just a few minutes.
BrandSPEEDY BEE #ad
ManufacturerSPEEDY BEE #ad
Height0.31 Inches
Length1.65 Inches
Weight0.02 Pounds
Width1.5 Inches
Part NumberSPEEDY BEE V2

5. Usmile

#ad

Matek System F722-SE F7 Flight Controller w/OSD Dual Gryo BEC Current Sensor Black Box for 4 5 6 inch 210 220 230 240 250 Carbon Fiber FPV Racing Drone Quad Quadcopter Frame X H Frame

#ad
Usmile #ad - Max. 3a, current sensor 184a scale 179 Battery Voltage Sensor: 1:10 Scale 110 Baro: bmp280 i2c osd: at7456e spi blackbox: MicroSD card slot SPI. 5x uarts 1, 4, 3, 2, 6 with build-in inversion 1x Softserial supported 8x Dshot/Proshot/oneshot outputs. Firemware: betaflight / inav, input: 6~36V 3~8S LiPo w/TVS protection. Pdb: 4x35a max. 4x46a bec: 5v 2a cont. Mcu: stm32f722ret6 216mhz imu: mpu6000 & icm20602, dual gyros built-in SPI.
BrandUsmile #ad
ManufacturerMatek Systems #ad
Part NumberF7-se

6. HGLTECH

#ad

HGLRC Zeus Mini F722 M3 2-6S F7 Flight Controller MPU6000 20x20mm FC Built-in OSD BEC Black Box for Betaflight Emuflight FPV Racing Drone RC Quadcopter

#ad
HGLTECH #ad - Quickly connect DJI. Integrated barometer and 16M black box. Easy direct soldering for XM+, NANO receiver. What you get:1x zeus f722 mini flight controller, 5x m3 shock absorption(red), 1x dji air unIT PORT CABLE 90mm, 1x dji air uniT PORT CABLE 90mm, 5x m3 to m2 stack mount adapter, 1x SH1.0 8pin 60mm Cable. Maximum bec 9v/2a and beC 5V/3A output.
BrandHGLTECH #ad
ManufacturerHGLTECH #ad
Height1.97 Inches
Length1.97 Inches
Width1.97 Inches
Part Number20200622

7. iFlight

#ad

IFlight SucceX-E Mini F7 V1.0 MPU6000 Flight Controller 20x20mm F7 FC Built-in OSD Barometer LC Filter 8MB Black Box Support Vista HD for FPV Racing Drone Quadcopter

#ad
iFlight #ad - 2. This f7 v1. 0 support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder. 4. This new f7 flight controller built with LC filter, this LC filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery. 5. Built with bat, 3. 3v, +5v, start indicator light, it will indicate the current working status. 1. Succex-e mini f7 v1. 0 flight controller support Vista HD VTX plug directly. 3. Succex-e mini f7 v1. 0 fc support analog vtx and analog camera directly plug, no need solder.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

8. iFlight

#ad

IFlight SucceX-E Mini F7 35A 2-6S Flight Stack 20x 20 MPU6000 F7 Mini Flight Controller with Mini 35A BLHeli_S 4in1 ESC for FPV Racing Drone Quadcopter

#ad
iFlight #ad - Support analog fpv camera plug and play, support frsky or TBS receiver plug and play. Succex-e mini f7 35a stack mounting hole: 20*20mm,φ3mm hole. Iflight succex-e mini f7 flight controller, support Vista HD Plug-and-Play. No need to solder tiny wires. F7 mini fc with high-performance CPU processor, smooth control and faster response. When you have any question or problem, please feel free to contact us any time, we will provide the best service! .
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

9. Matek Systems

#ad

BFOSD, 32K Gyro, Matek Systems F722-STD Flight Controller w/ F7, Barometer

#ad
Matek Systems #ad - Osd: betaflight osd w/ AT7456E chip. Baro: bmp280 i2C. Imu: 32k icm20602 gyro/accelerometer SPI. Mcu: 216mhz stm32f722reT6. Blackbox: microsd card slot SD/SDHC.
BrandMatek Systems #ad
ManufacturerMatek Systems #ad
Weight0.03 Pounds
Part Numbermodel-g-343