Top 9 BCD436HP Accessories – AC Adapters

As an Amazon Associate I earn from qualifying purchases.

1. Accessory USA

#ad

Accessory USA Wall Charger AC Adapter for Uniden Bearcat BCD436HP Digital Police Scanner

#ad
Accessory USA #ad - Compatiblity: wall charger ac adapter FOR Uniden Bearcat BCD436HP digital police scanner. Ovp, scp protection ovP: Over Voltage output Protection. Ocp: over Current output Protection. This adapter is new replacement, not original. Safety: our products are ce / fcc / rohs certified, ocp, tested by the manufacturer to match and / or exceed the OEM specifications. Note:please make sure the model of your device before buying. Scp: short Circuit output Protection.
BrandAccessory USA #ad
ManufacturerAccessory USA #ad

2. Nifty Accessories

#ad

Uniden BCD436HP and BCD536HP Mini-Manual by Nifty Accessories

#ad
Nifty Accessories #ad - Condensed ham radio set-up and operating instruction manual simplifies radio operation. Smaller, faster and easier to use than the factory instruction manual. Provides clear descriptions for all controls, setup menus and modes of operation. Laminated pages for durability and water resistance, great for GoKits. Simple step-by-step instructions, augmented with useful hints and explanations.
BrandNifty Accessories #ad
ManufacturerNifty Accessories #ad
Height5 Inches
Length8.6 Inches
Weight0.1 Pounds
Width0.4 Inches
Part NumberMM-BCD 436/536HP
ModelMM-BCD 436/536HP

3. AEcreative

#ad

AEcreative Wide-Band Scanner Antenna for Uniden SDS100 BCD436HP BCD396XT BC346XT BC75XLT BC125AT BR330T Whistler TRX-1 WS1040 WS1080 RadioShack Pro Icom IC-R30 IC-RX7 AOR Alinco DJ-X11 DJ-X7T BNC SMA

#ad
AEcreative #ad - Fit alinco dj-x2000t, dj-x7t, dj-x10t dj-x11t, dj-x3, dJ-X30T. Fit radio shack pro series whistler TRX-1 ws1040 ws1088 ws1010 etc. Fit uniden model: sds100, bc100xlt, bcd396t, bc346xtc bcd325p2, bcd436hp, sc200, ubc30xlt, bc245xlt, bc95xlt bc125at, bcd246t, bc72xlt, bc92xlt, bc80xlt, bc200xlt bc60, bcd396xt, bc346xt, bc296d bc75xlt, sc180b, & SC230. Fit icom ic-r20, ic-r30 ic-r6, ic-r10, ic-r5, ic-rx7 aOR scanner receiver. Wide-band receive, frequency range: 50mhz - 1200 MHz, free bnc/sma adapter, bendable antenna, fit BNC or SMA antenna connector.
BrandAEcreative #ad
ManufacturerAEcreative #ad
Part Number8541725512
Model8541725512

4. CASEMATIX

#ad

CASEMATIX Radio Case Compatible with CB Radios Midland 75822, Midland 75785 or Uniden BCD436HP 40 Channel CB 2 Way Radio, Must Remove Antennae, Uniden BC75XLT, Includes Case Only

#ad
CASEMATIX #ad - Main compartment dimensions measure 7. 4" x 2. 7" x 2. 7". Hard shell cb radio case: the casematix cb transceiver case will help organize and protect your large handheld or CB Radio Handheld Scanner, or other 40 Channel Radio models up to 7" MAX LENGTH with removable antennae.

Wrist strap for travel and transport: this case includes a comfortable and removable carrying wrist strap and measures only 8. 5" x 3. 5" x 3. 5" for convenience. Must remove antennae! padded interior divider for organization: This premium CB radio case features a padded divider to keep your police scanner separated from smaller accessories housed in the netted accessory pouch. Non-scratch interior lining: looking for a premium 2 way radio case? look no further, spare batteries, as this CASEMATIX walkie talkie case was constructed with non-scratch fabrics to keep your scanners looking and functioning like brand new! Spacious interior for accessories: this cb radio travel case features interior storage for cables, and other small accessories you may want to carry with your radio.

Must remove antennae, includes case only.
BrandCASEMATIX #ad
ManufacturerCASEMATIX #ad
Height3.5 Inches
Length8.5 Inches
Width3.5 Inches
Part NumberEVA8-MDLD
ModelEVA8-MDLD

5. AEcreative

#ad

AEcreative Long Wide-Band Scanner Antenna for Uniden Bearcat BCD396T BCD436HP BC346XT BR330T Icom IC-R5 IC-R6 IC-RX7 Alinco DJ-X11T DJ-X3 DJ-X7T DJ-X30T SMA

#ad
AEcreative #ad - Fit uniden bcd436hp, bc346xtc br330t, bcd396t, bc346xt, bcd396xt, ubc3500XLT. Fit icom alinco dj-x11t, dj-x7t, dj-x3, ic-r5, dj-x30t ic-r6, IC-RX7. Wide-band receive, soft bendable antenna, receive gain: 2. 25db, eceive frequency: 50mhz - 1200 MHz, fit SMA antenna connector. Antenna height: 16". Package include: 1x antenna.
BrandAEcreative #ad
ManufacturerAEcreative #ad

6. Lido

#ad

Cup Holder Mount for Uniden SDS100 and BCD436HP Radio Scanner

#ad
Lido #ad - Base expands to fit most car cup holder. Holds belt clip or button type mount. Height can be adjusted.
BrandLido #ad
ManufacturerLido Radio Products #ad
Part NumberLM-803-EXP2-Scanner

7. DIAMOND DOTZ

#ad

Max Power: 10 Watts, Length: 15" BNC, Diamond Original RH77CA 144/440 MHz. Dual-Band High Gain Handheld Antenna Rx: 120~900 MHz. Gain: 440 Mhz. 2.15 dBi

#ad
DIAMOND DOTZ #ad - Package dimensions :1. 092 cm l x5. 892 cm w x39. 700 cm H. Increase the performance on your Handheld Or Wideband Scanner With A Diamond Srh Series Antenna. Product type :Gps Or Navigation Accessory. Package Quantity :1.
BrandDIAMOND DOTZ #ad
ManufacturerDiamond #ad
Height1 Inches
Length15 Inches
Weight0.05 Pounds
Width1 Inches
Part NumberRH77CA
ModelRH77CA

8. QGP Supply

#ad

3-5VDC, Waterproof GPS Active Antenna 28dB Gain, SMA

#ad
QGP Supply #ad - Cable length: 3 meters. Waterproof active GPS antenna with SMA male connector. 28 db of gain with its built in LNA. Magnetic base allows you to conveniently attach it to to the roof of your car. Dc voltage: 3V to 5V.
BrandQGP Supply #ad
ManufacturerQGP Supply #ad
Height0.8 Inches
Length4.4 Inches
Weight0.12 Pounds
Width2.75 Inches
Part NumberQ1060
ModelQ1060

9. Uniden

#ad

Black, Uniden BC15 Bearcat 15-Watt External Communications Speaker. Durable Rugged Design, CB Radios, Perfect for Amplifying Uniden Scanners, and Other Communications Receivers

#ad
Uniden #ad - The uniden bc15 is a great looking speaker with a two-toned black and silver face-plate. The bc15 external communication speaker features 15 watts of max power and the BC15's built in noise blanker helps to reduce electrical interference that other manufacturer's accessory speakers allow to bleed through.

The uniden bc15 is fully compatible with all radios capable of accepting 3. 5 mm audio plug in connectors. Mount the bc15 communication speaker, plug in the 10 foot speaker wire to the speaker jack on your radio, and enjoy crystal clear audio output. The uniden bearcat bc15 15 watt communication speaker is an external accessory speaker that offers enhanced audio from CBs, Ham Radios, and Scanners.

Rugged and durable enough for any mobile application. If your mobile two-way radio happens to be mounted in a difficult to reach location the right angled 3. 5 mm audio plug on the BC15 will make it easier to get connected to the radio. Installation is quick and easy with BC15, in fact the most difficult part will be in locating your preferred mounting location. No more cranking your radio all the way up just to hear the conversation! .
BrandUniden #ad
ManufacturerUniden #ad
Height4 Inches
Length4 Inches
Weight1.31 Pounds
Width2.5 Inches
Part NumberBC15
ModelBC15
Warranty90 days