Top 10 SWR Antenna Analyzer – Radio Antennas

As an Amazon Associate I earn from qualifying purchases.

1. Wal front

#ad

Antenna Analyzer Meter 1-60MHz Shortwave SWR Antenna Analyzer with 1.0 to 9.99 SWR Usable Measurement Range For Ham Radio

#ad
Wal front #ad - Wide measurement range-- swr usable measurement range of this analyzer is 1. 0 to 9. 99. Application-- measure antenna electrical parameters: swr, impedance. High quality-- this antenna analyzer adopts black case would protect the antenna analyzer from external damage, durable in use.

Step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz. You can selects operation mode, band and extended functions. Measure and determine optimum settings for tuning stubs: SWR, Determine antenna tuner loss, resonant frequency, approximate Q, capacitance, bandwidth, inductance. It can measure feed-point impedance, Estimate quartz crystal parameters.

Convenient operation-- 5 operation buttons are easy and convenient to operate. Feature-- the antenna tester is powered by dc 12 to 14v 500ma external power with 2. 1mm power jackcenter pin positive, just connect the power and then work. Coaxial cable loss, ground loss, impedance resistance + reactance, inductors and capacitors. The meter has compact size, easy to carry and store in your bag.
BrandWal front #ad
ManufacturerWal front #ad
Height1.57 Inches
Length5.91 Inches
Weight1.21 Pounds
Width3.54 Inches
Part NumberWal frontav2nf169gr

2. HKCNMA.COM

#ad

PS100 UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 137.5MHz-2.7GHz N1201SA

#ad
HKCNMA.COM #ad - Startup and shutdown Hold down the CTRL key off press the power switch button. This instrument has four interfaces: Single point Measurement, Scanning, system information, correction and calibration The default boot into single-point measurement interface.

Meanwhile, in order to ensure the integrity of the calibration, the automatic shutdown function fails, the consistent boot. The boot state, long press 2S above the switch button, after the release, the instrument will shut down. Press the second button and power button at the same to power on. Note: for the convenience of the user, the calibration process, each time calibration correction options will automatically change to the user calibration.
BrandHKCNMA.COM #ad
ManufacturerShenzhen HKCNMA Co., Ltd. #ad
Part NumberPS100/N1201SA

3. Rig Expert

#ad

RigExpert AA-35 Zoom HF Antenna Analyzer 60kHz, 35MHz

#ad
Rig Expert #ad - Frequency range: 006 to 35 MHz. Swr measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes. Connector type: UHF SO-239. Dimensions: 103 mm x 207 mm x 37 mm 4. 1 in x 8. 1 in x 1. 4 in. Measurement for 25, 50, 75 and 100-Ohm systems.
BrandRig Expert #ad
ManufacturerRigExpert #ad
Height8.15 Inches
Length4.06 Inches
Width1.46 Inches
Part NumberAA35zoom
ModelAA35zoom

4. Yi Zhan Tong

#ad

2.7GHz N1201SA New Version, PS100 UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz

#ad
Yi Zhan Tong #ad - Meanwhile, the automatic shutdown function fails, the calibration process, the consistent boot. Note: for the convenience of the user, in order to ensure the integrity of the calibration, each time calibration correction options will automatically change to the user calibration.

This instrument has four interfaces: single point measurement, system information, scanning, correction and calibration. The default boot into single-point measurement interface. Press the second button and power button at the same to power on. Startup and shutdown Hold down the CTRL key off press the power switch button. The boot state, long press 2s above the switch button, long press 2S above the switch button, after the release, the instrument will shut down The boot state, after the release, the instrument will shut down.
BrandYi Zhan Tong #ad
ManufacturerYi Zhan Tong #ad
Weight1 Pounds
Part Number4330995977
Model4330995977

5. Riiai

#ad

Mini60S 1-60MHz HF ANT SWR Antenna Analyzer Meter Tester with Android BT APP PC

#ad
Riiai #ad - Power saving modes. Multi-point calibration for better accuracy. Automatic scanning results are displayed as frequencies of lowest SWR and complex impedance. Manual control option displays SWR and complex impedance at selected frequencies. Battery operated for field use or use external 13. 8v wall adapter.
BrandRiiai #ad
ManufacturerRIIAI #ad
Height1.18 Inches
Length4.72 Inches
Weight0.53 Pounds
Width2.36 Inches
Part NumberUS27LSWU0479
ModelUS27LSWU0479

6. Slickbox

#ad

MINI1300 HF/VHF/UHF ANT SWR Antenna Analyzer 0.1-1300MHz with TF Card 4.3" TFT LCD Touch Screen Aluminum Alloy Shell

#ad
Slickbox #ad - Great materialit uses aluminum alloy shell prolongs, can keep a service life. Frequency rangethis antenna analyzer is 01-1300mhz, hf/vhf/uhf continuous coverage.

Display modesNumerical display, curve display, simith chart. Lcd displaylcd size: 480x272 4. 3" tft lcd display, touch screen Type: Capacitive, All capacitive touchscreen on the display – no buttons are needed. Measurement datameasurement parameters: swr, |z|, scanning frequency sweep, and tdr mode;swr measurement Range: 1.0-1999(single point mode, +jx, r, -jx, returnloss;Measurement Mode: Single point measurement, 1.0-200 scan Mode.
BrandSlickbox #ad
ManufacturerSlickbox #ad

7. Hima

#ad

2.7GHz with Ham Radio with Aluminum Alloy Case PS100, UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester for 137.5 MHz

#ad
Hima #ad - Connector: sma-k, in order to ensure the accuracy of measurement and calibration, please warm up the instrument for at least 15 minutes.

Test parameters: impedance, S11, detailed measurement range, reactance, SWR, please see the description below. Package included: 1 x ps100 antenna analyzer standing wave meter, this model is: PS100 Operating frequency: 137. 5mhz--2700mhz, display 2. 4-inch tft, resolution 320*240 QVGA. If you encounter any problems, please contact the seller for after-sales service! Please read the long description section of the purchase page carefully, which details the specifications of the product.
BrandHima #ad
ManufacturerHima #ad
Part NumberSWR-PS-100

8. Rig Expert

#ad

Rig Expert AA-230 Zoom 100kHz-230MHz Antenna Analyzer

#ad
Rig Expert #ad - Making coaxial stubs or measuring their parameters. Comparing characteristics of an antenna before and after specific event rain, hurricane, etc. Tuning an antenna to resonance. Rapid check-out of an antenna. Cable fault location and Measuring capacitance or inductance of reactive loads.
BrandRig Expert #ad
ManufacturerRig Expert #ad
Height1.3 Inches
Length7.2 Inches
Width3.2 Inches
Part NumberAA-230 Zoom

9. Seesii

#ad

NanoVNA-H REV3.4 Vector Network Analyzer,10KHz -1.5GHz HF VHF UHF Antenna Analyzer Portable VNA 2.8" LCD

#ad
Seesii #ad - New upgraded version: this vector network analyzer added battery circuit management, see a clear hd image on your phone. Designed a practical and simple control application on PC, you can connect to mobile phone with Type C-Type C cable original PCB needs OTG cable, you can download touchstoneSNP files for radio design and simulation software.

Redesigned pcb, added a shell case, which is protective and dust-proof. The 50k-300mhz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1. 5ghz band is better than 40dB of dynamics. Moreover, more secure. What can you get: upgraded nanovna hostx1, 30mm sma male to male RG174 RF cable x2, sma simple calibration kit x1, USB Type-C data cable x1, SMA female to female connector x1.

Improved frequency algorithm range: frequency range is 10khz -1. 5ghz. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1. 5ghz. Mini & portable:upgraded nanovna that provides perfect vector network measurement capabilities, stand-alone with 2. 8-inch lcd display, could work for 2 hours continuously, tiny and handheld, if need extra working time, portable with battery powered or USB powered.
BrandSeesii #ad
ManufacturerSeesii #ad
Part NumberNanoVNA-HP
ModelNanoVNA-H

10. HKCNMA.COM

#ad

NanoVNA-F Vector Network Analyzer SWR Meter SmithUpgraded Hardware V3.1,10KHz-1.5GHz 4.3 Inch IPS TFT Shortwave MF HF VHF Portable Handheld Antenna Analyzer

#ad
HKCNMA.COM #ad - The lipo charing ic to be changed to IP5306 with 2A high charing current, making the charging time shorter. Upgrade the user program by virtual U disk 16MB SPI flash memory inside. Hkcnma. Com is registered trademark by shenzhen HKCNMA Co.

Ltd. Aluminium housing to protect smahead and reduce the interference of external electromagnetic waves on the instrument. Upgraded the large capacity 5000mah / 3. 7v lithium battery, and extended usb interface. Support Chinese and English menu switching. Nanovna-f with 4. 3-inch ips tft lcd and resistive touch screen, voltage standing wave ratio SWR, phase map, which can measure S-parameter, group delay, POLAR, DELAY, Smith chart, LINEAR and so on. Typically, longer standby time, it can be used as a mobile power source to charge Android or Apple phones when not in use.

At 600m-1ghz, the s11 has a dynamic range of 40dB the standing wave ratio is less than 1. 02. Use the harmonic of the clock chip si5351 to measure frequency up to 1000MHz. The measurement range of nanovna-f is 50k-1ghz. The rf front end is designed with a metal shield that allows the S21 to have a dynamic range better than 60dB over the full frequency range.
BrandHKCNMA.COM #ad
ManufacturerShenzhen HKCNMA Co., Ltd. #ad
Part NumberNanoVNA28
ModelNanoVNA2.8