Top 10 PWM Fan Controller 4 Pin – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.

1. 1 one enjoy

#ad

1 one enjoy Thermalright PWM Fan Hub PC Case Fan Controller 4 Pin, Support 10 Computer CPU Fans Splitter PWM

#ad
1 one enjoy #ad - Only one saTA connection to the system. Only the speed of the red port can be identified by the system. Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time. Stable sata power input: simple and stable. 10-port fan hub: supports 10 pwm 4 pin fans at the same time. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface. Compact design can save space and make the wire more tidy.
Brand1 one enjoy #ad
Manufacturer1 one enjoy #ad
Part NumberFANHUB-PWM

2. Noctua

#ad

Noctua NA-FC1, 4-Pin PWM Fan Controller Black

#ad
Noctua #ad - No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously. Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series. 6-year manufacturer’s warranty. Compact, highly flexible controller for 4-pin PWM fans.
BrandNoctua #ad
ManufacturerNoctua #ad
Height0.98 Inches
Length1.89 Inches
Weight0.11 Pounds
Width0.83 Inches
Part NumberNA-FC1
ModelNA-FC1
Warranty6 year manufacturer’s warranty

3. Thermaltake

#ad

Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1

#ad
Thermaltake #ad - Blue led power Indicator. Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place.
BrandThermaltake #ad
ManufacturerThermaltake USA Direct #ad
Height0.7 Inches
Length3.2 Inches
Weight0.1 Pounds
Width1.7 Inches
Part NumberAC-023-AN1NAN-A1
ModelAC-023-AN1NAN-A1
Warranty1 year warranty

4. Foyozisun

#ad

PWM Fan PC Hub, 8 Port 4-pin pwm Fan Controller with Speed Control Function PSU Splitter 1

#ad
Foyozisun #ad - 1 to 8 pwm fan hub: pc fan controller can be connected to 8pcs 3pin/4pin fans to solve the shortage of mainboard interface. Note: if your fan is a 3-pin fan, you can also plug in, but can not achieve PWM control speed! Pc fan controller:with speed control function can also be used as a fan hub conrtoller.

The speed can be adjusted at will. Easy to use: no drive, plug-and-play. Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard. Save space: the rotary switch with 20cm cable can be installed in any position of the PC case. With sided tape, can fix the governor firmly inside the chassis.
BrandFoyozisun #ad
ManufacturerFoyozisun #ad
Height0.39 Inches
Length2.36 Inches
Width1.18 Inches
Part Number001

5. SinLoon

#ad

SinLoon 4 Knob Cooling Fan Speed Controller PC 8 Channels Fan Hub for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- 4Pin Interface Power Supply 4 Pin 4Knob

#ad
SinLoon #ad - Functionpc 8 channels fan hub reduce speed to reduce noise & power consumption when computer parts are free. Increase speed to reduce computer part temperature when computer parts are busy.

Knob adjust4 knob cooling fan Speed Controller, This cooling fan hub is equipped with the independent speed controller. Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space. Universalwidely used for pc computer water cooling system, easy to install. Fan interface: 4piN 3PIN Can be connected. Power supply Interface: 4Pin interface. Material4 knob cooling fan speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.
BrandSinLoon #ad
Manufacturermandyyan #ad
Part Number22

6. skineat

#ad

Skineat Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points 2pack

#ad
skineat #ad - It has eva double-sided adhesive tape at the back of the hub to mount to the case or any flat place. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. 3 pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.

Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system. Most efficient sata to fan adapter in 2020 managing multiple fans from a single case input has become easier for you now. Please note 4 pin fan speed can be adjusted by temperature control as well. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.

This pwm hub sata accurately controls fan speed, you can slow down & the 4 pin at the same time to run multiple fans. You then need to connect the fan hub’s PWM cable to the motherboard. You just plug the board into the CPU fan motherboard connection & then SATA for power. The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at. The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan.
Brandskineat #ad
Manufacturerskineat #ad
Height0.04 Inches
Length0.04 Inches
Weight0 Pounds
Width0.04 Inches
Part NumberPEKZ-01

7. Comidox

#ad

Comidox 2PCS DC 12V 4 Wire PWM PC CPU Fan Temperature Control Speed Controller Module CPU High-Temp Alarm

#ad
Comidox #ad - Circuit load capacity: 5A for each output and 8A for bus current. It can be turned on with the three-wire fan monitoring function stall warning. Output range: 20%-100% for the first channel, or 40%-100% for the first channel tfl = on, 10%-100% for the second channel and the third channel.

Multiple fans can be used in parallel total current does not exceed 5A, temperature control speed has four temperature zone settings, support automatic temperature control and air cooling speed control, widely used. Note: the above range is only applicable to the PWM range, the actual control effect will vary depending on the fan. Supports all internal 12v 5a fans, high efficiency, synchronous rectified output, no need for additional heat sinks even for high current operation.
BrandComidox #ad
ManufacturerComidox #ad
Part Number8541608034
Model8541608034

8. ELECTOP

#ad

Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

#ad
ELECTOP #ad - If the chassis fan is configured in BIOS to run at 50%, then the speed is regulated by the speed for the "source" fan. So, the hub has a power source fed from the computer power supply, that designated by the system for that fan. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.

3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, but no speed signal. For both 4-pin and 3-pin fans. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans.

The ten fans will spin at the same speed, you will have 10 fans at 50%. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Please note 4pin fan speed can be adjusted by temperature control. You can connect to the CPU fan lead on the system board or the chassis fan lead. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Red is expected to be a pass through for the cpu fan.
BrandELECTOP #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P
Model4328444952

9. Toptekits

#ad

2 Pack Toptekits Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA Controller,1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan

#ad
Toptekits #ad - Package includes: 1x toptekits 4pin interface 1 to 10 Way PCB Adapter, 1X Toptekits SATA interface 1 to 10 way PCB adapter. The orange interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface.

Support pwM function fan automatic speed regulation. Toptekits computer/pc case fan controller power cable 1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan. Ide molex 1 to 10 way cooling fan splitter hub. Widely used for pc computer water cooling system. Eva double-sided adhesive can be used to fix the hub in the chassis. Designed for 12v 4-pin fan, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard. Pwm interface is connected to CPU FAN interface on motherboard by PWM cable.
BrandToptekits #ad
ManufacturerToptekits #ad
Weight0.04 Pounds
Part NumberTKPCFCPC
ModelTKPCFCPC

10. BUYMINERS.CA

#ad

Chassis Fan Hub CPU Cooling 10 Port 12 V Molex to PWM Connector with 4 Pin 3 Pin Efficient PC-Fan Controller System with Adhesive Tape Dedicated Supply from PSU to Link Multiple Points

#ad
BUYMINERS.CA #ad - The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. Money back guarantee - all of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right.

The pwm fan hub then matches the power level for the other ports. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis. Manages multiple fans - if your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. Cooling when you need it - quiet when you don't. No frills, all function - strong wire connections and clean sleeving are part of our simple, cost effective design.

If you are unhappy for any reason, contact us for a full refund. The 12v fan controller accurately controls 4-pin fan speed from a single case input. Take care during installation to avoid bending the pins and capacitor. Easy to install - just plug the molex fan controller into the motherboard and connect to the PSU.
BrandBUYMINERS.CA #ad
ManufacturerBUYMINERS.CA #ad
Height0.5 Inches
Length3 Inches
Width2.75 Inches
Part NumberFANHUBMOLEX
ModelFANHUBMOLEX
Warranty365 Days