Top 10 OLED Display Raspberry Pi – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. waveshare

#ad

Waveshare 1.5inch RGB OLED Display Module 128x128 Pixels 16-bit High Color 65K Colors with Embedded Controller Communicating via SPI Interface.

#ad
waveshare #ad - Supports 4-wire spi or 3-wire SPI interface, configured via onboard resistor. This is a general rgb oled display module, 16-bit high color 65K colors, 1. 5inch diagonal, with embedded controller, 128x128 pixels, communicating via SPI interface.128x128 high resolution, 65K colors, clearly displays colorful images. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/STM32. Display color: RGB, 65K colors.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Weight0.02 Pounds
Part Number1.5inch RGB OLED Module
Model1.5inch RGB OLED Module

2. waveshare

#ad

SPI Interface, 128x128 Pixels Displaying 65K Colors, waveshare 1.5inch RGB OLED Display Module, Compatible with Raspberry Pi Arduino STM32

#ad
waveshare #ad - Ssd1351 oled. Compatible with any Arduino project and is fairly simple to get setup and running. Supports 4-wire spi or 3-wire SPI interface, configured via onboard resistor. 128x128 high resolution, 65K colors, clearly displays colorful images. Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part Number1.5inch RGB OLED Module
Model1.5inch RGB OLED Module

3. Frienda

#ad

Frienda 10 Pieces I2C OLED Display Module OLED Display Screen Driver IIC I2C Tabellone Seriale con Display Auto-Luminoso Compatibile with con Raspberry PI Blue and Yellow

#ad
Frienda #ad - Driver and communication: embedded driver ic; communication is IIC/ I2C interface, Pi-Star, only needs 2 I/O ports; Compatible with MMDVM, and compatible with Raspberry pi. Compatibility: blue and yellow, raspberry pi, stim 32, 0.

96 inch oled module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Mega, 51 MCU, etc. Create fonts: there are no fonts embedded in the OLED controller, so users can use the font generation software to create the fonts. Self-luminous design: the oled display module is self-luminous, so that no backlight is required; It features high contrast, bright and crisp dots, which is convenient for you to read tiny fonts.

Product information: resolution is 128 x 64; view angle is more than 160 degrees; Supporting voltage is from 3. 3v to 5v dc; power consumption during normal operation is 004w, full screen lit is 008w.
BrandFrienda #ad
ManufacturerFrienda #ad
Part NumberFrienda-7653

4. UCTRONICS

#ad

UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico

#ad
UCTRONICS #ad - Uctronics 096 inch oled module for showing graphical & textual information directly on your micro-controller projects. Communication: i2c/iic Interface, only need two I / O ports.

Needn't backlight, the display unit can self-luminous. Resolution: 128 x 64, support voltage: 3. 3v-5v dc, power consumption: 004w during normal operation, View angle: > 160°, full screen lit 008w. It has super high contrast, bright and crisp dots, even tiny fonts quite readable. We offer technical support and software library as well as the guide book in the package. Embedded driver ic: ssd1306. No embedded fonts inside the oled controller, user can create the fonts through the font generation software. It supports many chips: arduino unO and Mega, 51 MCU, STIM 32, etc. Raspberry pi, the uno shown in the picture is NOT INCLUDE.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Height0.39 Inches
Length1.18 Inches
Weight0 Pounds
Width1.18 Inches
Part NumberU602602
ModelU602602

5. Bicool

#ad

Waveshare 1.5inch RGB OLED Display Module,128x128 Pixels 65K Colors SPI Interface Compatible with Arduino Raspberry Pi Jetson Nano STM32

#ad
Bicool #ad - Dimension: 44. 5 x 37 mm, viewing angle: >160°, operating voltage: 3. 3v / 5v, interface: 4-wire SPI, 3-wire SPI. Supports 4-wire spi or 3-wire SPI interface, configured via onboard resistor. Driver: ssd1351. This is a general 1. 5inch rgb oled display module, with embedded controller, 16-bit high color 65K colors, 128x128 pixels, clearly displays colorful images, communicating via SPI interface. Display color: RGB, 65K colors.
BrandBicool #ad
ManufacturerBicool #ad
Part Number1.5inch RGB OLED
Model1.5inch RGB OLED

6. Frienda

#ad

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

#ad
Frienda #ad - Product manual: as shown in the instructions. Power-saving display: the i2c oled display performs better than the traditional LCD display and with lower consumption the IIC I2C communications simplifies connections; Please note that these I2C OLED display module comes without pin headers.

More details: use compatible with arduino, stm32, esp32, esp8266, etc.3. 35v power; operating temperature: -40 - 85 ℃; Resolution: 128 x 32. What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight. Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, STM32, compatible with Arduino, also compatible with ESP8266, ESP32, etc.
BrandFrienda #ad
ManufacturerFrienda #ad
Part NumberFrienda-Display Module-v-5166

7. waveshare

#ad

Embedded SSD1305 Driver, with Raspberry Pi Pico Header, Using SPI/I2C Bus, waveshare 2.23 inch OLED Display for Raspberry Pi Pico, Supports Raspberry Pi Pico Series Boards, 128×32 Pixels

#ad
waveshare #ad - Comes with raspberry Pi Pico C/C++ and MicroPython Demo. Adopts both 4-wire spi and I2C interface, better compatibility, fast data rate. Standard raspberry Pi Pico header, supports Raspberry Pi Pico series boards. Operating voltage 3. 3v/5v, display size 55. 02 × 13. 10mm, viewing angle >160°, dimensions 63. 00 × 26. 00mm. 2. 23" oled display module for raspberry pi Pico, 128×32 pixels, embedded SSD1305 driver.
Brandwaveshare #ad
ManufacturerWaveshare #ad

8. DIYmall

#ad

1.3" Blue OLED Display I2C IIC Serial 128X64 LCD LED Module SH1106 for Arduino Raspberry Pi DIYmall

#ad
DIYmall #ad - Support wide voltage: 3. 3v-5v dc. Our 1 year worry-free-warranty and Friendly Customer Service. We offer free sample to anyone who make project. What you get: 1 x 1. 3" blue oled. Supported platforms: for arduino, msp430 series, STIM32 / 2, 51 series, raspberry pi, SCR chips.
BrandDIYmall #ad
ManufacturerDIYmall #ad
Height1.18 Inches
Length1.38 Inches
Weight0.01 Pounds
Width0.39 Inches
Part NumberFZ1427-1
ModelFZ1427-1

9. DORHEA

#ad

Dorhea 0.96 inch oled i2c Display Module IIC Serial LCD Screen 0.96" LED Module Display Yellow Blue 12864 oled /3.3V-5V 128 X 64 Compatible with Ardu ino Nano Display Raspberry Pi 51 Msp420 Stim32 SCR

#ad
DORHEA #ad - It compatible with arduino uno and Mega, 51 MCU, Raspberry pi, STIM 32. Needn't backlight, even tiny fonts quite readable. No embedded fonts inside the OLED controller, bright and crisp dots, the display unit can self-luminous.

This i2c display module is 096 inch diagonal, view angle: > 160°, full screen lit 008w, resolution: 128 x 64, Support voltage: 3. 3v-5v dc, power consumption: 004w during normal operation, Color:Yellow Blue. It has super high contrast, user can create the fonts through the font generation software. 096 inch oled module for showing graphical & textual information directly on your micro-controller projects. Low-power, very legible and vibrant, a crisp screen, pixels stand out very well even in a brighter circumstances like full sunlight. The iic address can be changed, it is convenient to use with different machines Four square holes are easy to install.
BrandDORHEA #ad
ManufacturerDORHEA #ad
Part Number15628-0.96

10. XYGStudy

#ad

2.23 inch OLED Display HAT for Raspberry Pi 2B/3B/4B/Zero/Zero W Jetson Nano 128×32 Pixels SPI/I2C Interface @XYGStudy

#ad
XYGStudy #ad - Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano. Trying to add a control interface for your Pi? This compact display would be the ideal choice. Part number: 2. 23inch oled HAT. This is an oled display hat for raspberry pi, 128×32 pixels, 2. 23inch diagonal, with embedded SSD1305 driver, communicating via SPI or I2C interface. 2. 23inch oled display hat for raspberry Pi, 128×32 pixels, SPI/I2C interface.
BrandXYGStudy #ad
ManufacturerXYGStudy #ad