Top 10 GPS Module Pps – GPS Antennas

As an Amazon Associate I earn from qualifying purchases.

1. MakerFocus

#ad

Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning, GPS Module GPS NEO-6MAr duino GPS

#ad
MakerFocus #ad - Usb directly connected to the computer, no need for external serial module, with the host computer-owned serial port function, That is, send IPX interface active antenna!. When using it, please make sure that the GPS module is in an open location.

Gt-u7 module, low power consumption, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. With a usb interface, the default distribution of active antenna, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, can be quickly positioned. Gpsbaud needs to be set to 9600 instead of 4800; pps pin is not needed unless using the gps to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, with high sensitivity, miniaturization, Software is compatible with NEO-6M.

How to use the gps module better, the link is obtained in the Product guides and documents, please download it before use. Note: this gps module will not search for signals when the weather is bad, and it will not search for stars indoors.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height0.39 Inches
Length1.09 Inches
Weight0.02 Pounds
Width3.94 Inches
Part NumberSN12SF83QOH11452IC
ModelSN12SF83QOH11452IC

2. HiLetgo

#ad

HiLetgo NEO-7M GPS Satellite Positioning Module for Arduino STM32 C51 Replace NEO-6M 3.3V/5V Power Supply

#ad
HiLetgo #ad - 2. With a usb interface, you can watch the computer positioning effect directly phone line. 4. With sma interface can be directly connected to an active antenna SMA. 1. Get 51 arduino STM32 microcontroller routine. 3. With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects. 5. Ttl level, compatible with 3. 3v/5v systems. Size:39*25. 5mm.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-1541

3. Deegoo-FPV

#ad

GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity, Drone Microcontroller, GPS Module Receiver,Navigation Satellite Positioning NEO-6M Arduino GPS

#ad
Deegoo-FPV #ad - If you have any issue when using our product, or you need product use documentation, please contact us directly for assistance. We will reply your problem in 24 hours. We try our best to provide the most professional service for each customer.

Usb directly connected to the computer, with the host computer-owned serial port function, That is, no need for external serial module, send IPX interface active antenna;. Gt-u7 module, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;. With a usb interface, the default distribution of active antenna, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, can be quickly positioned;.

Gt-u7 main module gps module using the original ublox 7th generation chip, low power consumption, with high sensitivity, Software is compatible with NEO-6M.
BrandDeegoo-FPV #ad
ManufacturerDeegoo-FPV #ad
Part Number001gps

4. Deegoo-FPV

#ad

GPS Module GPS NEO-6MAr duino GPS, Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning

#ad
Deegoo-FPV #ad - Support rate: 4800bps to 921600bps, data Level is TTL Level;. High sensitivity: tracking: -162dbm, cold start: -148dBm, reacquisition: -160dBm, Accuracy: 2.

0 m at position horizontal Typical Open Sky;. The data output, tx led flashing; PPS LED: red. This is gps+antenna integrated module, default 9600bps, small size, low power consumption and high ensitivity makes diy possible. Pps led not bright when GPS not fixed, flashing when fixed;. Wide range of applications:vehicle-mounted, Sharing bike, Vehicle-monitoring, handheld devices such as PDAs, camcorders and other mobile positioning systems, Mobile phones, Sharing mobile power. How it works: tx led: blue.
BrandDeegoo-FPV #ad
ManufacturerDeegoo-FPV #ad

5. Geekstory

#ad

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

#ad
Geekstory #ad - Bn 220 gps module documentation link cannot be displayed. If you need technical documentation, in the new page, please click “Geekstory”you can find "Sold by Geekstory" under Buy Now button, click “Ask a question” to email us.

Bn-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. The tx led flash means gps module output normally. The pps led flash means gps module locate your place. Data level : ttl or rs-232, default ttl level. To make it be rs232 output, you need to use one TTL to RS232 converter cable. If you need gps with flash and compass, please buy bn-880 from Geekstory. When you use it for raspberry Pi, there is no driver needed but you need to install software.
BrandGeekstory #ad
ManufacturerGeekstory #ad
Weight0.01 Pounds

6. Geekstory

#ad

BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory

#ad
Geekstory #ad - Here is connection with RPi, red to 3. 3v, black to gnd, white to rxd. What you will get: 1 x BN-180 GPS Module. To make it be rs232 output, you need to use one TTL to RS232 converter cable.

72 searching channel support rate : 4800bps to 921600bps, Default 9600bps. This bn-180 gps module can show your speed. The pps led flash means gps module locate your place. The tx led flash means gps module output normally. Data level : ttl or rs-232, default ttl level. This bn-180 gps module does not have flash and cannot be saved. When you use it for Raspberry Pi, green to txd, there is no driver needed.
BrandGeekstory #ad
ManufacturerGeekstory #ad
Part Number4336324809
ModelFZ2917

7. Teyleten Robot

#ad

Teyleten Robot ATGM336H GPS+BDS Dual-Mode Module Flight Control Satellite Positioning Navigator Replacement NEO-M8N NEO-6M for Arduino

#ad
Teyleten Robot #ad - Embedded positioning device. Wearable device. Mobile phones, tablet PCs, handheld devices. Car positioning in navigation.
BrandTeyleten Robot #ad
ManufacturerTeyleten Robot #ad
Height0 Inches
Length0 Inches
Width0 Inches

8. DIYmalls

#ad

DIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk CC3D Betaflight Flight Control

#ad
DIYmalls #ad - This is referred to as “cold start”. If you have any problem, in the new page, please contact seller as follow: click "DIYmalls"you can find "Sold by DIYmalls" under Buy Now button, click "Ask a question".

When you use it for raspberry Pi, there is no driver installation needed but you need to install software. To make it be rs232 output, you need to use one TTL to RS232 converter cable. But bn220 gps doesn't have compass. Once you’ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster. If you need gps with flash and compass, please buy bn-880 gps via "Visit the DIYmalls Store".

Bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. When you power up bn 220 gps module the first time in a new location, it always takes longer to find satillites. Data level : ttl or rs-232, default ttl level.
BrandDIYmalls #ad
ManufacturerDIYmalls #ad
Height0.59 Inches
Length7.48 Inches
Weight0.02 Pounds
Width3.15 Inches
Part NumberJS466-GGG-197

9. Geekstory

#ad

Geekstory BN-220 Dual GPS Glonass Module Navigation+GPS Passive Antenna with Flash TTL Level for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight ControlPack of 2PCS

#ad
Geekstory #ad - Data level : ttl or rs-232, default ttl level. You will get 2pcs bn-220 gps module,each module with 3pcs cable. To make it be rs232 output, you need to use one TTL to RS232 converter cable. The tx led flash means gps module output normally. The pps led flash means gps module locate your place. When it is used on raspberry Pi, it is not necessary to install the driver, but the software must be installed. Any problem please click “geekstory”you can find "Sold by Geekstory" under Buy Now button, in the new page, click “Ask a question” to email us.
BrandGeekstory #ad
ManufacturerGeekstory #ad

10. Geekstory

#ad

Geekstory BN-280 GPS Module M8030-KT Chip with 4M Flash + GPS Active Antenna Support GPS Glonass Beidou Galileo for Ar-duino Raspberry Pi Aircraft Pixhawk Betaflight CC3D F4 Flight Control

#ad
Geekstory #ad - Bn-280 gps module has flash to save configuration, so you do not need to reset data next time when you use it. If you need gps with flash and compass, please buy bn-880 or bn-880q from Geekstory.

The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”you can find "Sold by Geekstory" under Buy Now button, in the new page, click “Ask a question” to email us. Receiver mode: gps, glonass, beidou, qzSS and SBAS; 72 search channel. Data level : ttl or rs-232, default ttl level. When you use it for raspberry pi, galileo, there is no driver needed but you need to install software.

Red light, tx light, not positioned this light does not light; after 3D positioning, start flashing. Blue light, pps light, the upper blue light is flashing, indicating data output. But it has no compass. To make it be rs232 output, you need to use one TTL to RS232 converter cable.
BrandGeekstory #ad
ManufacturerGeekstory #ad
WarrantySix months