As an Amazon Associate I earn from qualifying purchases.
SMALLRIG #ad - Not for 6k pro!!!!!!!high customizationsmallrig bmpcc cage is specifically designed for blackmagic design pocket cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.
Rubber pads on the bottom protect your camera body from scratching. For better setup, “smallrig lens adatper support for metabones 2247” and “smallrig HDMI cable clamp 2246”, please search “smallrig mount for samsung t5 ssd 2245”, which are exclusively designed for BMPCC 4K & 6K.
Nato railfeatures built-in nato rail that allows you to quickly release accessories with NATO clamp. Perfect protectionsecure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Featured recommendationscompatible with ronin s and crane 2. It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. Mounting smallrig side Handle - 2187 for hand-held shooting.
MAGICRIG #ad - Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. There are a variety of mounting options to give you more options. Two m5 knob screws are used to lock the t5 ssd and its usb-C cable.
The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. Multiple mounting interfaces. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories.
Not for 6k pro! perfectly compatible - form-fitting design with unobstructed battery & SD card access. It consists of a cage with a nato handle and a t5 card holder. T5 ssd card holder. Magicrig cage kit for blackmagic design pocket cinema camera 4K & 6K. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories.
MAGICRIG #ad - The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. Multiple uses - this cage features a built-in nato rail on the top and left and right sides, or install a NATO handle for handheld shooting, allowing you to quickly release accessories with NATO fixtures, perfect for single or dual Handheld.
Fits for blackmagic pocket camera 4k / 6k Version.
FILMCITY #ad - Rock solid camera cage specifically designed for BMCC Camera includes multiple mounting options for more possibilities. Hi strength camera shoulder kit delivers balanced shots with immense comfort. Budget priced cinema camera rig can be used as handheld, Shoulder Mount as well as on Tripod.
The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
SMALLRIG #ad - Top recommendationwhen working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842. This is a basic and light handheld kit for BMPCC 4K & 6K users. The cage rig for bmpcc 4k & 6k is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
Original designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
Mounting pointssmallrig 2419 features multiple mounting points including nato rail, 1/4"-20 & 3/8"-16 holes, locating holes for arri, and Cold Shoe Mount. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft. Mount for samsung t5 ssdthe ssd holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable.
Alvin's Cables #ad - With output 7. 4v dc5. 5 2. 1 female socket. It is impossible to pop off. Bmcc mount adapter for sony NP-F970 F Series Batteries. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.
SMALLRIG #ad - An allen wrench is included for tightening. Not for bmpcc 6k !!!!!!!for select smallrig cagessmallrig hdmi & type-c right-angle adapter aaa2700 is specially designed for smallrig camera cage for BMPCC 4K like 2203, CVB2254B, 2203B, CVB2255, CVB2254, CVB2255B and 2766.
Note: please do not use it in damp conditions. Right-angle hdmi/usb type-c adapterit features hdmi and usb type-c male plugs on the camera side and hdmi and usb type-c female plugs on the other end.
Compact designthe 2 in 1 hdmi and type-c adapter takes up very little space and won't affect the use of other interfaces. Mounts using thumbscrewit features a thumbscrew to fix this adapter to the side of the camera cage tightly, and ensure a more stable connection. Well-made materialthe formfitting adapter is molded from pvc with stainless steel components to precisely fit the ports on the 4K camera.
MAGICRIG #ad - Two m5 knob screws are used to lock the t5 ssd and its usb-c cable. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories.
This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. There are a variety of mounting options to give you more options. T5 ssd holder.
The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. Perfectly compatible - form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. Magicrig cage kit for blackmagic design pocket cinema Camera 4K & 6K.
Tilta #ad - Full cage: the full camera cage provides complete protective armor for the BMPCC 4K and BMPCC 6K camera body. Includes: a full camera cage for bmpcc 4k/6k, top handle, SSD drive holder, usb-c cable for your SSD, and HDMI adapter.
Various configurations offered: A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
1. SMALLRIG
#adNATO Rail – 2203, New Version SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe
#adRubber pads on the bottom protect your camera body from scratching. For better setup, “smallrig lens adatper support for metabones 2247” and “smallrig HDMI cable clamp 2246”, please search “smallrig mount for samsung t5 ssd 2245”, which are exclusively designed for BMPCC 4K & 6K.
More information #ad
Mutiple moutingsthis cage comes with multiple mounting points, allow you to attach more accessories, cold shoe and 3/8’’ locating holes for ARRI standard, like microphone or SmallRig Articulating Arm – 2070, such as 1/4’’ & 3/8’’ threaded holes, etc. Nato railfeatures built-in nato rail that allows you to quickly release accessories with NATO clamp. Perfect protectionsecure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Featured recommendationscompatible with ronin s and crane 2. It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. Mounting smallrig side Handle - 2187 for hand-held shooting.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 2.95 Inches |
| Length | 7.56 Inches |
| Weight | 0.79 Pounds |
| Width | 4.53 Inches |
| Part Number | 2203-SR |
| Model | 2203-SR |
More information #ad
2. MAGICRIG
#adMAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K
#adThe mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. Multiple mounting interfaces. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories.
More information #ad
The handles are easy to transport and offer more convenience for low angle shooting. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. Not for 6k pro! perfectly compatible - form-fitting design with unobstructed battery & SD card access. It consists of a cage with a nato handle and a t5 card holder. T5 ssd card holder. Magicrig cage kit for blackmagic design pocket cinema camera 4K & 6K. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories.
| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.28 Pounds |
| Width | 2.95 Inches |
| Part Number | SM-529 |
More information #ad
3. MAGICRIG
#adMAGICRIG BMPCC 4K /6K Cage with Top Rubber Handle for Blackmagic Pocket Cinema Camera BMPCC 4K /BMPCC 6K
#adFits for blackmagic pocket camera 4k / 6k Version.
More information #ad
This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. Multiple mounting interfaces. Perfectly compatible - form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.08 Pounds |
| Width | 2.95 Inches |
| Part Number | SM-524 |
More information #ad
4. FILMCITY
#adFILMCITY Shoulder Rig Kit for Cinema Camera / Production Camera 4k FC-05 | BMCC Cage Rig Matte Box Follow Focus Accessories
#adMore information #ad
Ergonomic shoulder pad and soft grip handles delivers comfort for hours of operation. High grade camera matte box adds cinematic effects in your shots. Durable follow fOCUS delivers precise focus pull.| Brand | FILMCITY #ad |
| Manufacturer | FILMCITY #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 8.82 Pounds |
| Width | 0 Inches |
| Part Number | FC-05 |
| Model | FC-05 |
| Warranty | Replacement parts provided free the first year (Labor+ Parts) |
More information #ad
5. Tilta
#adTilta TA-T01-HCC Half Cage BMPCC 4K Cage Blackmagic Pocket Cinema Camera 4K Rig Tilta Gray
#adTilta #ad - The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
More information #ad
This “half” camera cage provides protective armor for around half of the bmpcc 4k camera body while providing several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Weight | 0.57 Pounds |
| Part Number | TA-T01-HCC |
| Model | TA-T01-HCC |
More information #ad
6. SMALLRIG
#adCompatible with BMPCC 4K & 6K, KCVB2419, Updated SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K
#adOriginal designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
More information #ad
For handheld shootingthis top handle from smallrig features a shoe mount for microphone and led lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. Mounting pointssmallrig 2419 features multiple mounting points including nato rail, 1/4"-20 & 3/8"-16 holes, locating holes for arri, and Cold Shoe Mount. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft. Mount for samsung t5 ssdthe ssd holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 6.91 Inches |
| Length | 8.35 Inches |
| Weight | 1.1 Pounds |
| Width | 4.65 Inches |
| Part Number | KCVB2419-SR |
More information #ad
7. Alvin's Cables
#adAlvin's Cables BMPCC4K Blackmagic Cinema Camera BMCC 4K BMPCC Power Supply Mount Plate Adapter for Sony NP F970 Battery
#adMore information #ad
It will automatically lock when inserted into the camera. The 2 pin connector is a push-pull self-locking connector. Cable length: 20 inches （50cm. With output 12v weipu 2 pin female cable for your BMPCC4K Blackmagic Cinema Camera BMCC 4K.| Brand | Alvin's Cables #ad |
| Manufacturer | Alvin's Cables #ad |
| Part Number | F970W2F |
| Model | F970W2F |
More information #ad
8. SMALLRIG
#adAAA2700, SMALLRIG HDMI/USB Type-C Right-Angle Adapter Only for Blackmagic Pocket Cinema Camera BMPCC 4K Camera Cage
#adNote: please do not use it in damp conditions. Right-angle hdmi/usb type-c adapterit features hdmi and usb type-c male plugs on the camera side and hdmi and usb type-c female plugs on the other end.
More information #ad
It's the perfect two-in-one adapter used to change the direction of the HDMI and Type-C ports to the screen. Note: this adapter is NOT compatible with BMPCC 6K camera. Compact designthe 2 in 1 hdmi and type-c adapter takes up very little space and won't affect the use of other interfaces. Mounts using thumbscrewit features a thumbscrew to fix this adapter to the side of the camera cage tightly, and ensure a more stable connection. Well-made materialthe formfitting adapter is molded from pvc with stainless steel components to precisely fit the ports on the 4K camera.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 1.54 Inches |
| Length | 2.02 Inches |
| Weight | 0.13 Pounds |
| Width | 1.2 Inches |
| Part Number | VA-2021052901 |
More information #ad
9. MAGICRIG
#adMAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K
#adThis cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. There are a variety of mounting options to give you more options. T5 ssd holder.
More information #ad
It consists of a cage with a top handle and a t5 ssd holder. Multiple mounting interfaces. This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. Perfectly compatible - form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. Magicrig cage kit for blackmagic design pocket cinema Camera 4K & 6K.
| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.26 Pounds |
| Width | 2.95 Inches |
| Part Number | SM-533 |
More information #ad
10. Tilta
#adTilta Camera Cage for BMPCC 4K 6K TA-T01-B-G Basic Kit SSD Drive Holder Top Handle for BMPCC 6K Camera RigTilta Gray
#adVarious configurations offered: A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
More information #ad
Attachments holes: the base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. Mounting points: the cage provides several 1/4-inch-20 and 3/8-inch-16 mounting points as well as three cold shoe mounting points.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Height | 3.35 Inches |
| Length | 9.15 Inches |
| Weight | 1 Pounds |
| Width | 6 Inches |
| Part Number | TA-T01-B-G |
More information #ad
