As an Amazon Associate I earn from qualifying purchases.
1. Neewer #ad
Neewer Universal Aluminum 15mm Rail Rod Support System High Riser DSLR Camera Mount Baseplate 9.8"/25cm Long with 1/4" Screw Quick Shoe Plate for Follow Focus Matte Box #adNeewer #ad
- Anodizing black finish. Manufacturer warranty will not apply. Made of durable anodizing black aluminum. Rails mount is adjustable in heighth.
Enables use of standard accessories for the 15mm rod system. Equipped with a quick shoe plate that enables the quick attached of the camera and easily slides into the adapter.
2. SMALLRIG #ad
SMALLRIG 15mm Rod Clamp Rail Connector Adapter with 1/4’’ Threads for DSLR Rig – 843 #adSMALLRIG #ad
- Features four 1/4’’-20 threaded holes, LED light, allowing you to attach the LCD monitor, articulating arm. Compatible with standard 15mm rods, like smallrIG 15mm rod 1053 and SMALLRIG 15mm rod 1051.
The spring ratchet wingnut is to tighten the rod and re-position in narrow spots where you’re not able to fully turn it. Lightweight, weighs only 40g. Made of aluminum alloy, sturdy and durable.
|Part Number||RodClamp01 - 4 thread|
3. SMALLRIG #ad
SMALLRIG Single 15mm Rail Clamp Mount Rod Clamp with Long Hole on Plate/Cage/Handle for Rod Extension, 1549 #adSMALLRIG #ad
- Smallrig single 15mm rail Clamp 1549. This single rail clamp can be mounted on a plate/cage/handle for rod extension. Connect your dslr rigs by utilizing the long hole and screws. Screws are included.
4. NICEYRIG #ad
NICEYRIG 15mm Rail Block Rod Clamp Mount 90 Degree Angle for 15mm Rod DSLR Shoulder Rig #adNICEYRIG #ad
- The rod clamp mount is a flexible connector that allows just about any item to be connected to 15mm rods. This 1. 5" rod can serve as 15mm quick release mount for adapting anything that requires a male or female 1/4"- 20 connection.
The rod mount includes a 1/4-20 female and male mounts to easily accommodate connections with On-camera monitors, Articulating Arms, and other accessories. New cnc design, black anodized.
5. NICEYRIG #ad
Microphone, 331, NICEYRIG 15mm Rod Clamp, LED Light, EVF Mount, Single Rod Holder for 15mm Rail Support System #adNICEYRIG #ad
- Niceyrig 15mm rod clamp 331 is equipped with one counterbore hole so that it can be mounted on top handle, camera rig cage or bmpcc 4k directly through 1/4’’ screw ! Built-in two 1/4’’-20 threaded holes on the bottom, the single rail clamp allows to install either a cold shoe adapter or a magic arm.
Made of aluminum alloy, durable to last long. 3 x rubber pads on bottom to protect from scratching & twisting. Still, can be used a 15mm rod to connect evf mount, monitor mount, microphone mount or SSD T5 mount - any other rigs with 15mm rod clamp.
6. SMALLRIG #ad
1903, SMALLRIG EVF Mount Camera Monitor Mount Kit with NATO Rail and 15mm Rod for SmallHD 502HD/Zacuto Gratical HD/BMVA #adSMALLRIG #ad
- Angle adjustment it features tilt adjustment and includes a bracket to hold the monitors for SmallHD DP4 and be rotated without interfering. Monitor mount the best load
7. NICEYRIG #ad
NICEYRIG Compatible NATO Cheese Top Handle with NATO Rail 15mm Rod Clamp Cold Shoe Mounts A6300 A6000 Camera Cage DSLR/ Camcorder/ Action Camera cage #adNICEYRIG #ad
- On each end of the rail has spring loaded pin, which prevents accidental accessory removal. You can twist the thumb screw off, adjust the handle 180 degree for camera and rigs balance or rotate the nato clamp to use this as a side handle.
Made of aluminum alloy, lightweight and durable. Get your handle off without needing an Allen key every time. There are 1/4" and 3/8" mounting points for additional accessories attachment. The nato handle is designed for quick release attaching and detaching on the camera.
The 15mm rod clamp allows for attachment of EVF mount or microphone shock mount and so on. The handle is equipped with two shoe mounts at both ends for attaching on camera lights, microphone shock mounts, etc. Attached to any two 1/4"-20 hole via 1/4"-20 screw to provide mount. Simply slide onto NATO rail and tighten down the wingnut screw.
8. NICEYRIG #ad
NICEYRIG 15mm Rod Clamp with NATO Rail for DSLR 15mm Railblock Support System, Matte Box, 333, Follow Focus #adNICEYRIG #ad
- Niceyrig 15mm rod clamp 333 equipped with a 63mm long nato rail, plus 1/4’’-20 threaded holes on top that enable to directly install NATO handle or any other 1/4’’ mount accessories. Securely attach the 15mm rail block to rig cage / shoulder pad / baseplate through a counterbore hole.
Quick release for attaching and detaching accessories. High quality aluminum alloy, sturdy and lightweight. Mounting on top or front of your camera cage, with dual 15mm rod the NATO rail clamp supports Follow Focus and Matte Box.
9. SMALLRIG #ad
SMALLRIG Camera Tripod Mounting Baseplate w/15mm Rod Clamp Rail Block for Tripod/Shoulder Support System, 1798 #adSMALLRIG #ad
- Camera protection: The rubber pad on the plate could protect your camera from scratch. 15mm rail blocks: 15mm rod clamps are available for the 15mm rod so that you can mount the shoulder pad, follow focus. It could be used for a long time.
It will be more stable and strudy. Strong and stable: the baseplate is locked via the screws and attach to the camera via the 1/4"or 3/8" screws. Balance ajustment: The groove allows 40mm adjustment for balance control of the camera. High quality: made of aluminum Alloy which is the high quality material.
10. SMALLRIG #ad
2272, SMALLRIG Universal 15mm Rail Support System with 15mm Rod Clamp and Quick Release Plate #adSMALLRIG #ad
- Universal baseplatea dedicated baseplate designed for mirrorless and DSLR cameras. You can attach smallrig 15mm rod 1053 for a Lens Support 2152 or Shoulder Pad 2077.
Mounting pointsthere are multiple 1/4’’ and 3/8’’ threaded holes on the bottom of the baseplate for attaching different tripod plate. Attach the qr plate to the camera or camera cage, and then drop it into the receiver, locked via the side knob screw.
Height-adjustablethe baseplate is height-adjustable via the side wingnut to ensure different cameras sit on the baseplate complying with the LWS standard, allow you to attach Follow Focus, Matte Box, etc. For arca standardfeatures a baseplate and a quick release plate for Arca standard on the top. 15mm rod clampcomes with a 15mm rail support system for accessories attachment.