Ancor 230236 Marine Grade Electrical Nylon Insulated Double Crip Funnel Entry Ring Terminals with Insulation Grip 8-Gauge, Size 3/8 Screw, 2-Pack

#ad
Ancor 230236 #ad - Ul 486c. 3/8" screw, 8 awg, 2 pack of Nylon Ring Terminals. The ancor marinco electrical group terminals is the perfect wiring accessory that you need to always keep in your ever growing boating tool kit. Barrels are designed to tightly grip the wire with the least effort. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment.

Tinned copper gives the least electrical resistance but the most corrosion protection. Double crimp, funnel entry. Nylon insulators are easy to crimp and will not split.

#ad



Ancor Marine Grade Heat Shrink and Nylon Disconnects

#ad
Ancor 75759 #ad -
#ad



Ancor Marine Grade Products 8 AWG Heat Shrink Butt Connectors 3 Pack

#ad
Marinco Electrical Group 309303 #ad - Tinned for corrosion resistance. Ul listed and csa recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.

Ancor Marine Grade Products 8 AWG Heat Shrink Butt Connectors 3 Pack #ad - Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. Brazed seam for maximum strength.

#ad



Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG

#ad
Ancor Marine Grade Products 111502 #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. The ancor marinco electrical group battery cable is the perfect wiring accessory that you need to always keep in your ever growing boating tool kit. Ul listed and csa recognized. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, gasoline, battery acid, oil, abrasion and ultra-violet radiation.

Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG #ad - . Brazed seam for maximum strength. 25 feet of red 8 AWG marine grade wire. Heat activated adhesive built into the sleeve of the heat shrink tubing. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Pure copper for maximum current flow. Tinned for corrosion resistance. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

#ad



Ancor 312603 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 12 to 10-Gauge, Size 3/8 Screw, 3-Pack

#ad
Ancor 312603 #ad - Ul listed and CSA recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Pure copper for maximum current flow. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Quantity: 3 Tinned for corrosion resistance. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Adhesive lined heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Marine gradetm heat shrink ring connectors feature tinned copper for maximum current flow and corrosion resistance.

Ancor 312603 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 12 to 10-Gauge, Size 3/8 Screw, 3-Pack #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Brazed seam for maximum strength. 25 feet of red 8 AWG marine grade wire. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. They are constructed with premium vinyl insulation that is rated at 600 volts, heat, 105 deg C dry and 75 deg C wet, battery acid, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, abrasion and ultra-violet radiation.

3/8" screw, 12-10 awg, 3 pack of Heat Shrink Ring Terminals.

#ad



Ancor 252286 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 1/0-Gauge, Size 3/8 Screw, 2-Pack

#ad
Ancor 252286 #ad - Ul listed and csa recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Closed end to seal out moisture. Ul 486a. 25 feet of red 8 AWG marine grade wire. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

. Ul listed and CSA recognized. Pure copper for maximum current flow. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Marine gradetm lugs are heavy duty, pure copper for maximum current flow, and tinned for corrosion resistance and easy soldering. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Ancor 252286 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 1/0-Gauge, Size 3/8 Screw, 2-Pack #ad - Closed end design seals out moisture so cables stay dry and corrosion free. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Heat activated adhesive built into the sleeve of the heat shrink tubing. They are constructed with premium vinyl insulation that is rated at 600 volts, oil, battery acid, 105 deg C dry and 75 deg C wet, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, abrasion and ultra-violet radiation.

3/8" screw, 12-10 awg, 3 pack of Heat Shrink Ring Terminals. 2 pack of 1/0 awg heavy-duty lugs with a 3/8" Screw Size Ring.

#ad



SELTERM UL Listed Marine Grade Tinned Copper Wire Lugs Heavy Duty Battery Cable Ends Eyelets Ring Terminal Connectors

#ad
SELTERM #ad - Ul 486a. Pure copper for maximum current flow. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Close end pad seals Out Moisture Keeping Cables Dry. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture.

Made from 100% annealed Tinned Copper for Max Current Flow. Tinned for corrosion resistance. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Seamless barrel design allows for maximum strength when crimped. 25 feet of red 8 AWG marine grade wire.

SELTERM UL Listed Marine Grade Tinned Copper Wire Lugs Heavy Duty Battery Cable Ends Eyelets Ring Terminal Connectors #ad - 2 pack of 1/0 awg heavy-duty lugs with a 3/8" Screw Size Ring. Heat activated adhesive built into the sleeve of the heat shrink tubing. Closed end design seals out moisture so cables stay dry and corrosion free. Ul tested & Approved. The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V.

#ad



Ancor Marine Grade Duplex and Triplex Wire

#ad
Ancor #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. They are constructed with premium vinyl insulation that is rated at 600 volts, heat, battery acid, oil, gasoline, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

3/8" screw, 12-10 awg, 3 pack of Heat Shrink Ring Terminals. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Corrosion free Ideal for Marine Automotive or Outdoor Use. Tinned for corrosion resistance. Ancor marine grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat CFR Title 46 standards.

Ancor Marine Grade Duplex and Triplex Wire #ad - Exclusive insulation is rated at 600 Volts. 2 pack of 1/0 awg heavy-duty lugs with a 3/8" Screw Size Ring. Ul 486a. Can be Crimped or Soldered. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105 DegreesC dry and 75 DegreesC wet, gasoline, oil, heat, stays flexible even in extreme cold -40 DegreesF/C and resists salt water, battery acid, abrasion and ultra-violet radiation.

Heat activated adhesive built into the sleeve of the heat shrink tubing.

#ad



12 Circuits with Negative Bus & Cover - Blue Sea Systems ST Blade Fuse Block

#ad
Blue Sea Systems 5026 #ad - Fuses sold separately. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Tinned for corrosion resistance. 3. 32"w x 6. 5"h x 1. 52"d. Can be used for 24-hour circuits. They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, oil, heat, battery acid, abrasion and ultra-violet radiation.

3/8" screw, 12-10 awg, 3 pack of Heat Shrink Ring Terminals. Close end pad seals Out Moisture Keeping Cables Dry. Ul 486a. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. Accepts ato and ATC fast acting blade fuses.

12 Circuits with Negative Bus & Cover - Blue Sea Systems ST Blade Fuse Block #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Ul listed and csa recognized. 25 feet of red 8 AWG marine grade wire.

#ad



Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover

#ad
BLW6A 2315 #ad - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity, cover made with clear polycarbonate. Continuous rating: 100A AC/DC. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Tinned for corrosion resistance. 2 mounting holes accept #10 M5 screws.

2 pack of 1/0 awg heavy-duty lugs with a 3/8" Screw Size Ring. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. 25 feet of red 8 AWG marine grade wire. Ul 486a. Made from 100% annealed Tinned Copper for Max Current Flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover #ad - Brazed seam for maximum strength. Closed end design seals out moisture so cables stay dry and corrosion free. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Ul tested & Approved. Corrosion free Ideal for Marine Automotive or Outdoor Use.

#ad



Blue Sea Systems 5177 50A Fuse Terminal

#ad
Acr Electronics 5177 #ad - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity, cover made with clear polycarbonate. Ignition protection for safe installation on gas-powered boats. Waterproof to IP66. Clear window provides visual indication of blown condition. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Ignition protected-safe for installation aboard gasoline powered boats. Ul 486a. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Blue Sea Systems 5177 50A Fuse Terminal #ad - . Ip66 - protected against powerful water jets. Positive distribution bus with #10-32 stud. They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, heat, battery acid, oil, abrasion and ultra-violet radiation.

3/8" screw, 12-10 awg, 3 pack of Heat Shrink Ring Terminals. Made from 100% annealed Tinned Copper for Max Current Flow.

#ad