AIMS Inline Fuse KIT 500 Amp

Compatible with 12, 24 or 48 DC volt systems. Ring terminal connections; Satin silver finish. Includes anl 500 amp inline fuse and holder. Protect your batteries with our high current ANL fuse kits. Can be connected in parallel. Accepts high current fuses.


The Install Bay ANL500-10 500 Amp ANL Fuse 10/pack

Package of 10500 amp anl fuse nickel plated Package of 10 500 amp anl Fuse. Nickel Plated.


AIMS Power PICGLFBATS Battery Temperature Sensor for Power Inverter Chargers

Compatible with new models of AIMS Power Pure Sine Inverter Chargers. Allows for careful monitoring of batteries for extended life and longevity. Nickel Plated. Package of 10 This is the aims power battery Temperature Sensor for the Low Frequency Inverters models. 500 amp anl Fuse. This allows careful monitoring of the batteries for extended life and longevity.

32 ft cable length.


AIMS Power REMOTELF Remote Switch with LCD Monitoring Screen

Compatible with new models of AIMS Power Pure Sine Inverter Chargers. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. Battery voltage. Allows for careful monitoring of batteries for extended life and longevity. Comes with 60 foot connection cable. Only works on picoglf models purchased afTER 12/01/14.

Package of 10 . 32 ft cable length. Ac input voltage and ac output voltage. This remote display panel is for the newest AIMS Power PICOGLF series pure sine inverter chargers. 500 amp anl Fuse. Frequency Monitoring. Nickel Plated. Comes with 60 foot connection cable. Load Percentage Monitoring.


AIMS 5000 Watt 12 Volt DC Power Inverter

This new aims 5000 watt compact Power Inverter also has 2 other major changes. The best part is that the unit cost has not changed, it is still the best value available in this size power inverter. Only works on picoglf models purchased afTER 12/01/14. Ac direct Connect Terminal. This inverter replaces PWRINV5000W.

Aims did a great job upgrading this unit. Pre-wired for remote on/off switch. Nickel Plated. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. 32 ft cable length. Introducing the aims compact 5000 Watt Modified Sine Wave Power Inverter. 5000wmax continuous power. Aluminum case for optimal cooling 500 amp anl Fuse.

Make sure that the chassis ground lug on the back of the power inverter is solidly connected to the ground system of your vehicle, boat or home. Battery voltage. Package of 10 Load Percentage Monitoring. Comes with 60 foot connection cable.


SELTERM 10 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

Can be Crimped or Soldered. Allows for careful monitoring of batteries for extended life and longevity. Ac output short circuit protectionOver Temperature LED indicator; over Load LED indicator. Lugs are suitable for use with Welding Cables and Battery Cables. 32 ft cable length. Frequency Monitoring. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.

The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Only works on picoglf models purchased afTER 12/01/14. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Close end pad seals Out Moisture Keeping Cables Dry. Load Percentage Monitoring. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

5000wmax continuous power. Comes with 60 foot connection cable. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers.


Blue Sea Systems e-Series On/Off Battery Switch

Single cooling fan operation thermally controlled. Terminal stud size: 3/8" - 16. 3. 85"h x 3. 85"w x 3. 1"d. Battery voltage. Single circuit on-off. Allows for careful monitoring of batteries for extended life and longevity. Pre-wired for remote on/off switch. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers.

Close end pad seals Out Moisture Keeping Cables Dry. Continuous rating: 350A, Maximum voltage: 48V DC. Ul tested & Approved. Frequency Monitoring. Ac direct Connect Terminal. Ip66 waterproof, iso 8846 and meets ABYC requirements. Nickel Plated. E series battery switch, mfg# 9003E, Red, 350A control.600a int. 48vdc. Heavy duty construction for Enhanced High Temperature Durability.

Ac output short circuit protectionOver Temperature LED indicator; over Load LED indicator. 500 amp anl Fuse.


IZTOR 0/2/4 Gauge Ga Awg Gold ANL Fuse Holder with 250 Amp Fuse

Load Percentage Monitoring. Heavy duty construction for Enhanced High Temperature Durability. 5000wmax continuous power. Durable High Temperature Base. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ac output short circuit protectionOver Temperature LED indicator; over Load LED indicator. Compatible with new models of AIMS Power Pure Sine Inverter Chargers.

Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. Ignition protected-safe for installation aboard gasoline powered boats. Allows for careful monitoring of batteries for extended life and longevity. No wire terminals Needed to Make a Connection. Includes 1 fuse holder and 1 250A ANL Fuse.

Frequency Monitoring. Single cooling fan operation thermally controlled. Nickel Plated. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Only works on picoglf models purchased afTER 12/01/14. Comes with 60 foot connection cable. High Conductive Finish.


AIMS Power REMOTEHF Flush Mount Power Inverter Remote On-Off Switch

Can be Crimped or Soldered. Crystal Clear Cover. Close end pad seals Out Moisture Keeping Cables Dry. No wire terminals Needed to Make a Connection. Of cable; easily extendable with RJ-9 cable. Terminal stud size: 3/8" - 16. Includes 30 ft. Durable High Temperature Base. Compatible with new models of AIMS Power Pure Sine Inverter Chargers.

Continuous rating: 350A, Maximum voltage: 48V DC. Single circuit on-off. 5000wmax continuous power. Ac input voltage and ac output voltage. The perfect accessory for your AIMS Power Inverter. Switches a single battery to a single load group. Includes 15 ft. Mount this remote to your dash, control panel, or access panel for quick and easy control of your AIMS Power inverter.

This remote also now features a dip switch allowing you to turn on or off the LED indicator light. Includes 1 fuse holder and 1 250A ANL Fuse. Frequency Monitoring. Comes with 60 foot connection cable. Dip switch control for LED light.


Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

Frequency Monitoring. Dip switch control for LED light. Crystal Clear Cover. Rated voltage: 600V. The young4us durable heat shrink tubes are made from polyolefin, the internal layer is coated by hot-melt adhesive, which resist to harsh environment and have a high heat-shrinkable ratio of 3:1, which has satisfied bonding performance.

Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. 5000wmax continuous power. Includes 1 fuse holder and 1 250A ANL Fuse. Ignition protected-safe for installation aboard gasoline powered boats.

These tubes are suitable for bundling, electrical insulation, mechanical protection and wire joints etc. Nickel Plated. The tubes have the advantages of good insulativity, which can be widely used in wiring, seal, excellent corrosion resistance and abrasion performance, water proofing, corrosion prevention and insulation protection for electronic component, metal pipeline and electrical wire and cable, etc.

Ip66 waterproof, iso 8846 and meets ABYC requirements. Includes 30 ft. Compatible with new models of AIMS Power Pure Sine Inverter Chargers. Comes with 60 foot connection cable.


2W LED Ceiling Lights - Dream Lighting LED Recessed Lighting Fixture - Warm White Downlight Kit Black Shell Pack of 10

Of cable; easily extendable with RJ-9 cable. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. 32 ft cable length. It really saves battery energy. Pre-wired for remote on/off switch. Dip switch control for LED light. Pack of ten! commercial led lights for vehicle ceiling, cabinets! Adapted finest LED chips, these 12V LED cabinet lights consumes really low power at 2 watts.

Are you also looking for lights with black cover to match these lights? Please search B00YWTDZWU on Amazon. Nickel Plated. This cabinet lights with efficient lighting and reasonable price worth your purchasing! specifications: Input voltage: 12volt DC Current draw: 150mA Wattage: 2W Luminous flux: 110 lumens Lighting color: Warm White Lighting angle: 120 degrees Color temperature: 2900-3100K Bezel: black, ø 2.

76 inches / 76mm cut out diameter: ø 2. 1 inches / 53mm no mounting hardware included Installation Instruction: Recessed Installation 1. 5000wmax continuous power. Of cable; easily extendable with RJ-9 cable. Single cooling fan operation thermally controlled. Turn off the power supply, connect the black wire to positive, the white one to negative 3.

Comes with 60 foot connection cable.